LGvX 4500 Cell Phone Manual

Welcome

Congratulations for choosing the advanced and compact VX4500 cellular phone, designed to operate with the latest digital mobile communication technology, Code Division Multiple Access (CDMA). Along with the many advanced features of the CDMA system, such as greatly enhanced voice clarity, this phone offers:
Large, easy-to-read, 8-line backlight LCD with status icons.
Paging, messaging, voice mail, and caller ID.
18-key keypad.
Voice Commands.
Menu, List and Keypad Readout.
Announce Mode/Driving Mode.
Long battery standby and talk time.
Menu-driven interface with prompts for easy operation and configuration.
Any key answer, auto answer, auto retry, one-touch and speed dialing with 99 memory locations.
Bilingual (English and Spanish) capabilities.

Check Accessories

Your mobile phone comes with a rechargeable battery and a one-slot desktop charger. Please verify that these accessories are included.

Important Information

This user's guide provides important information on the use and operation of your phone. Please read all the information carefully prior to using the phone for the best performance and to prevent any damage to or misuse of the phone. Any unapproved changes or modifications will void your warranty.

FCC Part 15 Class B Compliance

This device and its accessories comply with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device and its accessories may not cause harmful interference, and (2) this device and its accessories must accept any interference received, including interference that causes undesired operation.

Technical Details

The VX4500 is a dual-band phone that operates on both Code Division Multiple Access (CDMA) frequencies: cellular services at 800 MHz and Personal Communication Services (PCS) at 1.9 Ghz.

CDMA technology uses a feature called DSSS (Direct Sequence Spread Spectrum) that enables the phone to keep communication from being crossed and to use one frequency channel by multiple users in the same specific area. This results in a 10-fold capacity increase when compared with analog mode. In addition, features such as soft/softer handoff, hard Handoff, and dynamic RF power control technologies combine to reduce call interruptions.

The Cellular and PCS CDMA networks consist of MSO (Mobile Switching Office), BSC (Base Station Controller), BTS (Base station Transmission System), and MS (Mobile Station). The following lists some major CDMA standards.

1xRTT system receives twice as many subscribers in the wireless section as IS-95. Its battery life is twice as long as IS-95. High-speed data transmission is also possible.

FCC RF Exposure Information

WARNING! Read this information before operating the phone.
In August 1996, the Federal Communications Commission (FCC) of the United States, with its action in Report and Order FCC 96-326, adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards.

This device was tested for typical use with the back of the phone kept 3/4 inches (2 cm) from the body. To comply with FCC RF exposure requirements, a minimum separation distance of 3/4 inches (2 cm) must be maintained between the user’s body and the back of the phone, including the antenna, whether extended or retracted. Third-party belt-clips, holsters, and similar accessories containing metallic components should not be used. Avoid the use of accessories that cannot maintain 3/4 inches (2 cm) distance between the user’s body and the back of the phone and have not been tested for compliance with FCC RF exposure limits.

(Optional, if available.)
A minimum distance of 8 inches (20 cm) must be maintained between the user/ bystander and the vehicle-mounted external antenna to satisfy FCC RF exposure requirements. For more information about RF exposure, visit the FCC website at www.fcc.gov.

Use only the supplied and approved antenna. Use of unauthorized antennas or modifications could impair call quality, damage the phone, void your warranty and/or result in violation of FCC regulations.

Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin a minor burn may result. Contact your local dealer for a replacement of antenna.

Phone Overview

Menus Overview

Getting your Phone Started

The phone comes with a rechargeable battery. Keep the battery charged while not in use in order to maximize talk and standby time. The battery charge level is shown at the top of the LCD screen.

Installing the Battery

To install the battery, insert the bottom of the battery into the opening on the back of the phone. Push the battery down until the latch clicks.

Removing the Battery

Turn the power off. Lift the release latch to detach the battery.

Charging the Battery

The desktop charger has a charging slot that accommodates the phone with the battery attached or the battery by itself.

Warning! Use only the desktop charger provided with the phone. Using any (desktop) charger other than the one included with the VX4500 may damage your phone or battery.

2. Insert the phone with an installed battery, or the battery itself, into the charging slot. The red light indicates the battery is charging and the green light indicates the battery is fully charged. The charge time varies depending upon the battery level. The maximum charge time for a fully discharged battery is 3 hours.

Battery Charge Level

The battery charge level is shown at the top right of the LCD screen. When the battery charge level becomes low, the low battery sensor alerts you in three ways: sounding an audible tone, blinking the battery icon, and displaying LOW BATTERY WARNING! If the battery charge level becomes exceedingly low, the phone automatically switches off and any function in progress is not saved.

Turning the Phone On and Off

NOTE: Like any other radio device, avoid any unnecessary contact with the antenna while your phone is on.

Turning the Phone Off

Signal Strength

Call quality depends on the signal strength in your area. The signal strength is indicated on the screen as the number of bars next to the signal strength icon: The more bars, the better the signal strength. If the signal quality is poor, move to an open area. If you are in a building, the reception may be better near a window.

Screen Icons

When the phone is powered on, the top line of the LCD screen displays icons indicating the status of the phone.

Signal Strength Icon: Signal strength indicator. The strength of the signal received by the phone is indicated by the number of bars displayed.

No Service Icon: No Service indicator. The phone is not receiving a system signal.

In use Icon: In use indicator. A call is in progress. No icon indicates the phone is in standby mode.

Basic Phone Operation

NOTE: If the phone is restricted, you can only dial phone numbers saved in the Emergency Numbers or your Contacts. To turn off this function: Menu, [9] Settings, [4] Security, Enter Lock Code, [2] Restrict, Off, OK

Correcting Dialing Mistakes

If you make a mistake while dialing a number, press [CLEAR] once to erase the last digit entered or hold down [CLEAR] for at least 2 seconds to delete all digits.

Redialing Calls

1. Press [SEND] twice to redial the last number you dialed. The last 30 numbers are stored in the call history list and you can also select one of these to redial.

Receiving Calls

NOTE: If you press [END] or side keys while the phone is ringing or vibration is muted for that call.

Quick Access to Convenient Features

Use Manner Mode in public places. When Manner Mode is set, Cell phone vibrating icon is displayed on the screen, the key tones are silent, and the phone is set to vibrate.

Use Silence All Mode in public places. When Silence all Mode is set, music note with line icon is displayed on the screen, the key tones are silent, and the lamp blinks instead of the phone ringing or vibrating.

Use Lock Mode to prevent others from using your phone. When Lock mode is set, lock icon is displayed on the screen and your 4-digit password is required to use the phone.

Use the side keys to adjust the earpiece and ringer volumes. The upper key increases the volume and the lower key decreases the volume.

Call Waiting

Your cellular service may offer call waiting. While a call is in progress, two beeps indicate another incoming call. When call waiting is enabled, you may put the active call on hold while you answer the other incoming call. Check with your cellular service provider for information about this function.

Caller ID

Caller ID displays the number of the person calling when your phone rings. If the caller's identity is stored in the Contacts, the name appears with the number. Check with your service provider to ensure they offer this feature.

Speed Dialing

Speed dialing is a convenient feature that allows you to make phone calls quickly and easily with a few keystrokes. Your phone recalls the number from your Contacts, displays it briefly, and than dials it. Speed Dial number 1 is always for Voice mail.

Voice Command

Voice dialing is a convenient feature that allows you to make phone calls quickly and easily by verbal command. Your phone recalls the number from your Contacts, displays it briefly, and then dials it.

NOTE: Another way to activate Voice Command is to set Announce Mode to on. When the flip is opened you will be asked to say a command.

Entering and Editing Information

You can input and edit your Banner, Schedule, Contacts, and messages.

Key Functions

Right Soft Key(Left Soft Key): Press to scroll through the following text
input modes: T9WORD, Abc, 123, Symbols, Smiley.

There are five modes for entering text, numbers, special characters, and punctuation. In a text entry field, pressing Right Soft Key displays a pop-up list of text modes.

Use to type text using one keystroke per letter. The phone translates keystrokes into common words by using the letters on each key and a compressed database.

Changing Letter Case

Using T9 and Abc text input modes you can set the capitalization. Press [STAR] to cycle through the following:

Using Abc (Multi-tap) Text Input

Using T9 Mode Text Input

Using the Next Key

After you have finished entering a word, if the word displayed is not the one you want, press [0] to display additional choices of words from the database.

Adding Words to the T9 Database

If a word is not in the T9 database, add it by using Abc (Multi-tap) mode text entry. The word is automatically added to the T9 database.

Contacts in Your Phone's Memory

This allows you to have easy access to your most frequently dialed phone numbers. You may store up to 499 entries with up to 5 phone numbers each.
Each entry may be up to 22 characters. Each phone number may be up to 48 digits.

The Basics of Storing Contacts Entries

Options to Customize Your Contacts

Once basic phone number and name information is stored in your Contacts, you can edit and/or customize the entries.

Adding or Changing the Group

Changing the Call Ringer

Allows you to identify who is calling by setting different ringers for different phone numbers in your Contacts. It is automatically set to the default ringer when the Contact is saved.

Changing the Message Ringer

Allows you to identify who is sending you a message by setting different ringers for different phone numbers in your Contacts. It is automatically set to the default ringer when the Contact is saved.

Adding or Changing the Memo

Allows you to enter up to 32 characters as a memo to the Contact entry.

Adding or Changing the Picture ID

Changing the Secret Setting

Adding or Changing the URL

Adding Speed Dial

Editing Contacts Entries

Through Contacts

Default Numbers

The phone number saved when a Contact is created is the Default Number. If more than one number is saved in a Contact entry, another number can be saved as the Default Number.

NOTE: The Default Number cannot be deleted by itself. The entire Contact entry can be deleted or another number can be set as the Default Number allowing you to delete the original saved number and keep the Contact entry.

Changing the Default Number

Editing Stored Phone Numbers

Editing Stored Names

Editing Customized Options

Deleting

Deleting a Contact Entry

Additional Ways to Delete a Contact

Deleting a Speed Dial

Phone Numbers With Pauses

When you call automated systems such as voice mail or credit billing numbers, you often have to enter a series of numbers. Instead of entering these numbers by hand, you can store the numbers in your Contacts separated by special pause characters (P, T). There are two different types of pauses you can use when storing a number:

Storing a Number With Pauses

Adding a Pause to an Existing Number

Searching Your Phone’s Memory

The VX4500 phone is able to perform a dynamic search of the contents in your phone’s memory. A dynamic search compares entered letters or numbers against the entries in your Contacts. A matching list is displayed in descending order. You can then select a number from the list to call or edit. There are several ways to search:

Scrolling Through Your Contacts

Searching by Letter

Searching Options

Making a Call From Your Phone’s Memory

Once you have stored phone numbers into your Contacts, you can place calls to those numbers quickly and easily.

Using Speed Dialing (refer to "Speed Dialing")

Voice Command

Voice Command is a convenient feature that allows you to make phone calls quickly and easily by saying a voice command that you have recorded in your Contacts.

Prepending a Stored Number

Prepend can be used if you are out of your home system area and need to add the area code to an existing number. When a Contacts entry or message callback number shows up on the display, you can add to the beginning of the original number. However, you cannot edit the original number.

Using Phone Menus

Press Left Soft Key Menu to have access to nine phone menus. There are two methods to access menus and submenus:

Contacts (Menu [1])

The Contacts Menu allows you to store names, phone numbers and other information in your phone’s memory. When you access your Contacts, the number in parenthesis represents the number of entries you have stored (up to 499).

Access and Options

List Contacts (Menu [1] [1])

New Number (Menu [1] [2])

New E-mail (Menu [1] [3])

Groups (Menu [1] [4])

Speed Dials (Menu [1] [5])

My VCard (Menu [1] [6])

Recent Calls (Menu [2])

The Recent Calls Menu is a list of the last phone numbers or Contact entries for calls you placed, accepted, or missed. It is continually updated as new numbers are added to the beginning of the list and the oldest entries are removed from the bottom of the list.

Access and Options

Dialed Calls (Menu [2] [1])

Received Calls (Menu [2] [2])

Missed Calls (Menu [2] [3])

Erase Calls (Menu [2] [4])

Call Timer (Menu [2] [5])

1x Packet Counter (Menu [2] [6])

Messages (Menu [3])

The phone can store up to 116 messages (for example, 1 voice message, 50 inbox text messages, 50 outbox text messages, 15 saved text messages). The VX4500 supports up to 160 characters per message including header information. The information stored in the message is determined by phone mode and service capability. Other limits to available characters per message may exist. Please check with your service provider for system features and capabilities.

New Message Alert

Access and Options

Voice Mail (Menu [3] [1])

Allows you to view new voice messages recorded in the voice mail box. Once you exceed the storage limit, old messages are overwritten. When you have a new voice message, your phone alerts you.

New Message (Menu [3] [2])

Allows you to send text messages, pages, and e-mail transmissions. Each message has a destination (Address 1) and information (Message). These are dependent upon the type of message you want to send.

NOTE: If you send an SMS message to a phone without SMS, you will still be notified that the message was sent, however the message will not be received.

Customizing the Message Using Options

Validity: Validates delivery to the Short Message Center (SMC) without being transmitted to the destination address for certain periods of time. Those messages will be deleted within the programmed time frame. Default/30 minutes/1 hour / 2 hours/12 hours/1 day/2 days/3 days

Insert Quick-Text: Inserts predefined phrases. Yes/No/Call Me/Need Directions/Where Are You?/Will Call Later/Busy/On My Way/Will Arrive 15 Minutes/Thank You/Love You

Message Icon Reference

Cancel: After transmission to message center has occurred, messages that have not been delivered may be canceled by transmitting cancel message.

Pending: Transmission is unavailable in a no service area. Messages are pending transmission. Pending messages are transmitted automatically when digital mode becomes available.

Inbox (Menu [3] [3])

Received text messages, page messages, and e-mail lists may be searched and the contents viewed. Received messages are displayed from newest to oldest.

If the memory is full, no more messages can be received until enough memory space becomes available. The message NOT ENOUGH MEMORY is displayed and new messages are not accepted.

Viewing Your Inbox

Save object: Saves pictures, animations, sounds, melodies and vcard objects in Message Objects and Contacts allowing you to use Wallpaper and Ringtone.

Lock/Unlock: Locks or unlocks the selected message. Locked messages can not be deleted by the Erase Inbox and Erase All functions.

Outbox (Menu [3] [4])

Up to 50 sent messages can be stored in the Outbox. View lists and contents of sent messages and verify whether the transmission was successful or not.

Lock/Unlock: Locks a message so that it is not erased if the Erase Outbox or Erase All feature is used.

Saved (Menu [3] [5])

Lock/Unlock: Locks a message so that it is not erased if the Erase Saved or Erase All feature is used.

Msg Settings (Menu [3] [6])

Message Settings Sub-Menu Descriptions

Auto Save (Menu [3] [6] [1])

Auto Delete (Menu [3] [6] [2])

Callback # (Menu [3] [6] [3])

Msg Alerts (Menu [3] [6] [4])

Allows you to select the alert type for a new message. Alert types are Voice Mail Alert, Text Msg Alert, Page Alert, and 2 MIN Alert.

Signature (Menu [3] [6] [5])

Direct View (Menu [3] [6] [6])

Entry Mode (Menu [3] [6] [7])

Edit Voice Mailbox # (Menu [3] [6] [8])

Allows you to manually enter the access number for Voice Mail Service. This number should only be used when VMS access number is not provided from the network.

Quick-Text (Menu [3] [6] [9])

Auto Play (Menu [3] [6] [0])

Font Size (Menu [3] [6] [*])

Allows you to determine the font to use when entering message content or reading text Inbox, Outbox, and Saved Msgs Folders.

Erase All (Menu [3] [7])

Allows you to erase all text messages stored in your Inbox, Outbox, or Saved Msgs Folders. You can also erase all messages at the same time.

Get It Now (Menu [4])

Get It Now allows you to do more than just talk on your phone. Get It Now is a technology and service that allows you to download and use applications on your phone. With Get It Now, it is quick and easy to personalize your phone to your lifestyle and tastes. Just download the applications that appeal to you. With a wide range of software available, from Ring Tones to games to productivity tools, you can be assured that you can find something useful, practical, or down right entertaining. There are constantly new applications being created for your use.

You can download applications and use Get It Now anywhere on the Verizon Wireless network, as long as your handset has a digital signal available.
Most applications do not use a network connection while in use.

While downloading an application, incoming calls will automatically be sent to your voice mail, if available. If you do not have voice mail, downloading will not be interrupted by an incoming call, however the caller will receive a busy signal.

When using applications, an incoming call will automatically pause the application and allow you to answer the call. When you complete your call, you can resume using the application.

Get Apps (Menu [4] [1])

NOTE: When the file memory is full, the message "File Memory Full. To make enough storage space to install this app, the following app(s) will be temporarily disabled: You can restore disabled apps by simply starting them, at no additional purchase cost. Proceed?" will be displayed. If you select Yes, the app(s) will be disabled.

et Info (Menu [4] [2])

If you need more memory, but still want to be able to access the application later, try using Disable. Disabling keeps the application usage and purchase information, but removes it from memory. Restore an application when needed.

Only removing an application deletes it completely from the memory of the phone. To restore an application once it has been removed will require that you pay and download it again.

Mobile Web (Menu [5])

The MiniBrowser feature allows you to view internet content, via VZW with MSN, especially designed for your mobile phone. Access and selections within this feature are dependent upon your service provider. For specific information on MiniBrowser access through your phone, contact your service provider.

Start Browser (Menu [5] [1])

Use [NAVIGATION KEYS] to scroll through the content if the current page does not fit on one screen. The currently selected item is indicated by a cursor on the screen.

To navigate to different screens or select special functions, use the Soft Keys. The function associated with the Soft Keys can change for each page and depends on each highlighted item.

Left Soft Key is used primarily for first options or selecting an item but its function may change, depending on the content displayed.

Right Soft Key is used primarily for secondary options or a menu of secondary options.

When prompted to enter text, the current text entry method appears above the Right Soft Key as Alpha, Symbol, Number, Word. To change the input mode, press the Right Soft Key. To create an upper case character, use [STAR].

When entering text or numbers, press [CLR] to clear the last number, letter or symbol. Press and hold [CLR] to clear the input field completely.

You can make a phone call from Minibrowser if the site you are using supports the feature (the phone number may be highlighted and Left Soft Key appears as Call).

The browser connection is terminated when you initiate the call. After you end the call, your phone returns to the screen from which you initiated the call.

Web Messages (Menu [5] [2])

Allows you to view Web messages, If there are any browser messages, the list is displayed from newest to oldest.

Alert beep (Menu [5] [3])

My Media (Menu [6])

Graphics (Menu [6] [1])

Music (Menu [6] [2])

Message Objects (Menu [6] [3])

Voice (Menu [7])

Voice Menu allows you to use your voice to activate certain features of your phone such as the Scheduler, Memo, and Driving Mode.

NOTE: Pronounce phone numbers digit by digit. Do not say "1-800" as "one eight hundred." Instead, say "One, eight, zero, zero."

Start Commands "(Menu [7] [1])

NOTE: Voice function is recognized only in English, but Spanish is not supported. For instance "San Jose: is not recognized as [San Hose], Spanish pronunciation, but as [San Jose] as in English.

Voice Memos (Menu [7] [2])

Voice Settings (Menu [7] [3])

Allows you to select options for voice activation, announce alerts and recognition results; and enables you to adapt the phone to recognize your way of saying numbers.

Voice Commands (Menu [7] [3] [1])

Flip open: Activates voice recognition whenever you flip open the phone. (When the phone is already open, you activate voice recognition by pressing the voice command key.)
Side key only: Activates voice recognition when you flip open the phone and press the voice command key.

Announce Alerts (Menu [7] [4] [2])

Best Match (Menu [7] [4] [3])

After you say a name or a number, your phone displays the recognition results- the name or number that best matches the one you said - and asks you to confirm. Select the number of results that you want your phone to display.

4 Results: Displays the four names or numbers that best match the one you said and asks you if the first one is correct. If you say "Yes" the phone makes the call. If you say "No", the phone suggests the second one in the list, and so on, up to the fourth result.

Train Words (Menu [7] [3] [5])

Command Train is an optional personalization feature that helps your phone recognize the way you pronounce commands. If you do not get consistently good results with the commands, perform this brief, one-time session.

Help (Menu [7] [6])

Tools (Menu [8])

Your phone tools include a Alarm Clock, Notepad, EZ Tip Calculator, Calculator, and World Clock.

Alarm Clock (Menu [8] [1])

Allows you to set one of four alarms. The current time is displayed at the top of the screen when you select an alarm to set. At the alarm time, Alarm 1 (or 2 or 3, as applicable) will be displayed on the LCD screen and the alarm will sound.

Scheduler (Menu [8] [2])

Allows you to conveniently keep and access your agenda(s). Simply store your appointments and your phone will alert you with a reminder of your appointment.

Notepad (Menu [8] [2])

Ez Tip Calc (Menu [8] [3])

Allows you to quickly and easily calculate the amounts for a bill with the amount of the bill, the amount of the tip and the number of people as variables.

Calculator (Menu [8] [4])

Allows you to calculate simple mathematical computations. You can enter numbers up to the second decimal place.

NOTE: Calculations can be made with up to 32 characters at one time (e.g.,
63+78-21 would be 8 characters).

World Clock (Menu [8] [5])

Settings (Menu [9])

Sounds (Menu [9] [1])

Ringers (Menu [9] [1] [1])

key Tone (Menu [9] [1] [2])

NOTE: Dual-Tone Multi Frequency (DTMF) Signaling by the simultaneous transmission of two tones, one from a group of low frequencies and another from a group of high frequencies. Each group of frequencies consists of four frequencies. Setting the Key Beep length to Long will extend the DTMF tone.

Volume (Menu [9] [1] [3])

Alerts (Menu [9] [1] [4])

Service Change (Menu [9] [1] [4] [1])

Alerts you when service changes. When you enter a service area, the phone displays "Entering Service Area" message. When you leave a service area, the phone displays "Leaving Service Area" message.

Minute Beep (Menu [9] [1] [4] [2])

Call Connect (Menu [9] [1] [4] [3])

Back To Top (Menu [9] [1] [4] [4])

ERI Sounds (Menu [9] [1] [4] [5])

Power On/Off Tone (Menu [9] [1] [5])

Display (Menu [9] [2])

Banner (Menu [9] [2] [1])

Backlight (Menu [9] [2] [2])

Main LCD(Menu [9] [2] [2] [1])

Key Light Timer (Menu [9] [2] [2] [2])

Screens (Menu [9] [2] [3])

Menu Style (Menu [9] [2] [4])

Clocks (Menu [9] [2] [5])

Theme Colors (Menu [9] [2] [6])

Status LED Colors (Menu [9] [2] [7])

Contrast(Menu [9] [2] [8])

Fonts (Menu [9] [2] [9])

Calling Digits (Menu [9] [2] [9] [1])

Text Editor (Menu [9] [2] [9] [2])

Language(Menu [9] [2] [0])

System (Menu [9] [3])

Select System (Menu [9] [3] [1])

Allows you to set up the phone producer’s management environment. Leave this setting as the default unless you want to alter system selection as instructed by your service provider.

Set NAM (Menu [9 ][3] [2])

Allows you to select the phone’s NAM (Number Assignment Module) if the phone is registered with multiple service providers.

Auto NAM (Menu [9] [3] [3])

Allows the phone to automatically switch between programmed telephone numbers corresponding to the service provider area.

Serving System (Menu [9] [3] [4])

Identifies the channel number of a system that is served and a SID Number.
This information is only for technical support.

Security (Menu [9 [4])

Lock Phone (Menu [9] [4 ][1])

Keeps your phone from unauthorized use. Once the phone is locked, it is in restricted mode until the lock code is entered. You can receive phone calls and still make emergency calls. You can modify the lock code using the New Lock code within the Security menu.

Unlock: The phone is never locked (Lock mode can be used).

Lock: The phone is always locked. When locked, you can receive incoming calls or make only emergency calls.
On Power Up: The phone is locked when it is turned on.

Restrict (Menu [9] [4] [2])

Allows you to restrict outgoing calls. If you set this feature to On, you can only place calls to emergency numbers and phone numbers stored in your Contacts. You can still receive calls in the restrict mode.

Emergency #s (Menu [9] [4] [3])

Allows you to enter 3 emergency numbers. You can call these emergency numbers and 911, even when the phone is locked or restricted.

Change Code (Menu [9] [4] [4])

Erase Contacts (Menu [9] [4] [5])

Reset Default (Menu [9] [4] [6])

Call Setup (Menu [9] [5])

Auto Retry (Menu [9] [5] [1])

Answer Call (Menu [9] [5] [2])