Step 1: Make sure you have 48 ounces of white vinegar on hand. You will
also need an empty sink and a ceramic mug (do not use a paper cup.)
Step 2: Empty the water in the Water Reservoir
Step 1: Pour the vinegar into the Water Reservoir and fill it to the top edge
of the clear viewing area.
Step 2: Place a ceramic cup in the Drip Tray and run a brew cycle. DO
NOT USE A K CUP just press the Large Cup Button. Pour the contents
of the cup into the sink.
Step 3: Repeat the brew process until the Water Reservoir is empty,
pouring the contents of the cup into the sink after each cycle. Remember to
open and close the lid between each cycle.
Step 4: Now fill reservoir with fresh water and let the Brewer stand for 4
hours while still on.
Step 5: Rinse the Water Reservoir thoroughly and fill with fresh water.
Step 1: Ensure the Water Reservoir is filled with fresh water.
Step 2: Place a ceramic cup on the Drip Tray and run a regular brew cycle.
Pour the contents of the cup into the sink.
Step 3: Repeat the brew process until the Water Reservoir is empty.
Step 4: You may need to perform additional brew cycles if you notice any
residual taste.
Note From Accessible Devices: Using one half to one teaspoon of baking soda in the rinse water will work wonders in helping to remove the vinegar taste.A couple of us have used this with great success. We do not however, guarantee it will work for you.
Return To The Product Text Manuals Pageupdated on ... April 14, 2009